Hey,
I have told three people I would send them some pictures of my 5.2 spin rig, but instead I thought I would post them on here again. These are not close up shots, if you want to know specifically how to do it I am going to do a write up here about it.

1. You will need all the parts, you can try and fabricated them yourself or you can order them online from Murrays.com (sorry rick you don't carry alot of the Nacra stuff in the online store) below is a list of parts and links to them

Pin that mounts on front beam where the pole sits
http://www.murrays.com/mm5/merchant.mvc?...p;Store_Code=MS

Spinnaker Bale (this is what the line at the top runs through at you hoist to)
http://www.murrays.com/mm5/merchant.mvc?...p;Store_Code=MS

Pole (just about anything will work, but about 12 feet has worked well for me)
Snuffer hoop( mine is aluminum but you can buy carbon ones from ricks online store I believe)
Spinlock cleat to cleat the halyard
4 ratchet blocks