If someone out there knows how long a tornado spin pole should be, it will help, as Ive found little on the web outlining equipment dimensions.
sorry i wasnt around last week. a t-pole is 13'2". as per the bow holes, i have never seen a mystere bow break off due to a spin bridal. i have seen a g-cat bow tip break off. It is common to drill, then fill (with epoxy) to seal, and then re-drill a small hole for the bridal. (again sorry i didnt respond last week, i see your chain plates). This is to "seal" the hull from both moisture (and weakening) and some people have drilled into their bows, and then fill with water after a capsize... (no names.... right dave?)
