+2 for Sunrise Yacht Products
I installed a Sunrise Tramp on my P19MX 5-6 years ago ... I was very happy w/ it upon installation. It is a "Bias Cut" model and therefore is laced only along the stern/aft crossbar. The jib sheets to reinforced patches on the tramp so the "cheese cutter" jib traveler system was elimenated thereby cleaning up the tramp. I also had a large zippered pocket installed just behind the mast for storage ( throwable, (2) collapsible paddles, misc safety gear, water bottles ...)
It's holding up well and I'm still very happy w/ it ...
Oh, imagine my surprise when we installed new tramps on the 43' Trimaran I crew on for the local CBYRA races last year when I noticed the packaging labels indicated that they were produced by .... Sunrise Yacht Products ... it seems that they make replacement tramps for alot of the larger "cruising multihulls" .... I quess that makes +3
Harry
P-19MX/Sail#86
Harry,
Do you have some photos of the tramp? This sounds a lot like what I am looking for. Is the forward bag above or below the tramp? I have my rotator moved to the base of the mast and blocked on the tramp. The bag gets in the way when I throw a few bottles of "water" in there. I am also thinking of adding a few more grommets for a somewhat adjustable jib lead. A small bag under the tramp would be nice in the rear as well, a good place to stuff extra sheet and a snack for a long haul.
