I'm not going to up the size of anything else. I may change out the diamond wires if I have to go to some ridiculous number on the Loos gauge. All the hardware and wires are way oversize to begin with. I do hear what your saying though. I guess the best way to put it, is I know the mast will fail if we're pushing it hard. The rest would be shocking if there was a failure as its all the same stuff as off the F18, with exception of the wire rigging. F18 has a ridiculous wire size written in the rules, but what is there is more than adequate for the loads. So if anything breaks, it will more than likely be a failure, vs a overstressing scenario.