ok here is the update. Picked up a set of plans based kind of on the west system plans. Have had a naval architect add a wave peircing bow which brings the boat to just about 20 feet plus or minus 3inches. THe beam is ten foot. Mast will be about 34 feet once I can get hold of Martstom. We are building a plug now for the hulls. THe hulls all come out of one mold with a cut out in the deck for canting daggars (hope it works well) The hulls attach to a base plate and the plate controls the cant of the hulls. Beams will be carbon. I'm working on the dolphin striker with a guy out of australia. Daggars and rudders will be bought off the shelf as I do not want to build them. Rudder castings will probably be a stock part also. The boat is a three beam boat with a custom front carbon beam, the pole attaches to the front beam and bases out on a plate under the front beam. I plan on doing a end boom sheeting system and a curved track that attaches to both hulls and the rear beam. Hulls will be carbon and foam. I am looking for a good supplier of carbon matt. I have desided to use west systems as it is a known quantity. My dad went and got the materials for the plug today and as we are expecting a huge storm here will probably start tommorow on it. As for drawings I can't seem to get the damn things loaded on this site.

Steve