Arbo,

I would not rest the H20 pole against the bridle wires. It really needs to be down about 1-1 1/2 feet to keep the pole low. I try to rig mine so that the pole has a good amount of bend in it. The tip is about 1 foot above the plane of the top of the hulls.

I rig the pole to the bridle attachment point because I couldn't bring myself to punch holes in my bows. However it is perfectly exceptable to drill a small hole at the bow if you prefer.

I run lines from the tip of the pole to the bridle attachment point. I also run a line from the bridle up around the pole and back to the bridle to keep it lower than the bridle.

Mike Hill
H20 #907