| What is the ideal beach cat design #23167 08/11/03 07:06 PM 08/11/03 07:06 PM |
Joined: Jul 2001 Posts: 800 MI sail6000 OP
old hand
|
OP
old hand
Joined: Jul 2001
Posts: 800 MI | Some of us prefer and sail 14 ft cats ,-some would prefer sailing the 120ft Playstation ,--most of us for many practical reasons are somewhere in between ,-categorized into typical beachcats that is generally a 16 18 or 20 ft length, with a few {super } exceptions . What would be your ideal dream cat design and what features would it have ,-{other than auto refill refrigerated Labatt,s keg and tapper lead to camelpack or sippy helmet } . In general specs of Length -Beam -W -Sail area and general features or improvements as standards you would like to see or hope to see developed for future cat design. Here are my current thoughts on a dream cat design ,Prefer the 20 Length for its ability in seas to be pushed hard without pitchpoling but would also race an 18 or singlehand a 16 as a matter of practicality being physically larger.. Like the 8.5 beam for trailerability , but also did enjoy owning and sailing a cat with wings to extend crew weight and beam .-would like the design-construction aspects of the cat to be as light as possible consistant with strength of all componants ,-rig boards rudders hardware also able to handle surf and extreme conditions , Hulls should have positive floatation , crossbeams should be oval shaped with no flat sides to slam and pound waves - Mast -C F and light ,-sections are really getting good --see some A-masts ,-spin-s are great with a snuff system -mid pole ,-sailplan could be larger than current 20s ,-larger wings would allow crew to handle the added main area and spin ,the added power would more than offset added wing weight - Hulls and bows would then have to have more volume to handle the added sailarea ,-a planing shape becomes possible in a more canted configuration and more power to get on plane. Larger spin should be set further forward on a longer pole to help lift bows ,-the more luff angle the more lift ,-this potentially causes a lee helm problem with the spin up evan with raked aft mast ,--The solution to balance and planning may be a small molded in skeg or mini foil near the bows that may also help lift and increase area for planning aspects ,-the rudders may be larger than current practise and idealy be adjustable to assist CLR and helm balance also somewhat offsetting the forard molded in forward foils . recap -more sail >more volume >planning capabilty >spin forward >more lift >forward molded foils >evan more lift and balance under forward spin .---{worth experimenting with} Out on larger wings the crew requires a good -J line -or safety line system to keep them in place but easily releasable . A good readable digital compass location molded in for the crew with countdown features and combined with a GPS ,- {Garmin needs to work on this one }-- A storage cooler area would be nice and place for spares and tools . Athetically on fast cats I like some color -slick graphics ,-and artwork on the sails . This is my {wish list } for consideration of future cat design ,-We have so many good cat design types out there now ,-but one thing for certain is that they will continue to change . -added note on future classes and the sport - The A class developed to its hi tech state is a great one and has again experienced an increase in class and will continue well into the future mainly because it is allowed limited development.-B Class eventually became the Tornado selected for the Olympics with similar longevity due to excellent design and development over the years ,- Formula classes seem to be some of the largest currently with the most potential for similar longevity that create great interest and partisipation and have great appeal to a wide variety of sailors .A good single handed spin F-Class group is also needed beyond the 16 -18s and 20s in i-F and HT classsification in each Length category ,- Would like to see all cats fall within these basic categories for racing groups and an improved rating system to allow equal rating classification by equalizing in design formula the basics of sail area length weight and beam.-Current cats that require periodic refitting and new sails could then target the ideal size and configuration with mods and updates to race equally in each L category -with spin and non spin and also single handled handed spin and non in sub categories .Very important also are entry level cat design like waves -14s etc for new and experienced sailors alike to help them along and into the sport . All cats have a rating ,and race ,-the concept is to target a max in L W SA category for preferred equal class racing ,-those over equal rating move up to the next level for start sequences. Hope to see it all in the near future and know we will see many more than the 1000 to 2000 currently estimated racing catsailors. Really believe setting up a more desirable L W SA RATING class racing structure will help along with great new designs that are sure to keep being developed.-The numbers could easily be ten times current est. within the decade if set up promoted and marketed in the media and existing sailing organizations and with new events for all catsailing and future catsailing enthusiasts. New cat design with -colorfull graphics and team artwork on sails flying off wave tops airborn with crews trapped out is a very appealing image , very marketable in this sports crazed country ,and just waiting for the right combination of good folks to make it happen . Carl - I-20 H-18 +spare platform SC -15 sailboard cayak w sail {sippy helmet optional} | | | Re: What is the ideal beach cat design
[Re: sail6000]
#23168 08/11/03 08:20 PM 08/11/03 08:20 PM |
Joined: Apr 2002 Posts: 591 Bradenton, FL Sycho15
addict
|
addict
Joined: Apr 2002
Posts: 591 Bradenton, FL | My ideal beach cat already exists. It sits on a trailer a few miles south of me and gets broken out for the big regattas.
It is the G-Force 21 Grand Prix. 21' long and 11' wide with high-volume hulls and a really tall mast (owner has installed a mast taller than what the Tornados are running). It's got a nice new square-top main and roller-furling jib. I think a roller-furling reacher would be the perfect headsail for this boat in the common conditions for my area (fairly light winds in the summer). I would like to see a set of "wings" on it and 3 trapeze wires per side. A deck configuration that loses the deck-lip and increases bow volume would be nice, and is exactly what Hans did with the new G-Cat 5.0 Turbo.
Otherwise... I'd like to see a kevlar or carbon-fiber version of the Reynolds 21 Cat. Something like an 'expedition' boat that can hold some gear, get the crew out of the weather, and handle rough conditions. It should be light enough (when empty, at least) to be cat-tracked up the beach by two people.
G-Cat 5.7M #583 (sail # currently 100) in Bradenton, FL
Hobie 14T
| | | Re: What is the ideal beach cat design
[Re: Sycho15]
#23169 08/12/03 02:38 AM 08/12/03 02:38 AM |
Joined: Aug 2002 Posts: 545 Brighton, UK grob
addict
|
addict
Joined: Aug 2002
Posts: 545 Brighton, UK | I think an important factor is price (look at the interest the "Thoughts: Why there's no $3k (US$) "starter cat"" thread generated). If you want a carbon boat are you happy to pay carbon prices?
I would like a low maintenance, cheap, and robust boat, I would like to be able to take be able to take all breakable bits off easily, vandalism is getting to be a problem at our club. It needs to be sail and forget. Now I have young children I have a lot less time to sail, and I begrudge spending that time fixing the boat. There is no point in a fast boat if I don't get to use it!
It needs to be easy to setup and sail.
Conversely my ideal boat also needs to be the one all my buddies sail. At the moment thats my Hobie 16 which certainly does not meet the above criteria. Cheap to buy but expensive to maintain.
Gareth
Last edited by grob; 08/12/03 02:40 AM.
| | | Re: What is the ideal beach cat design
[Re: sail6000]
#23170 08/12/03 03:47 AM 08/12/03 03:47 AM |
Joined: Apr 2003 Posts: 1,669 Melbourne, Australia Tornado_ALIVE
Pooh-Bah
|
Pooh-Bah
Joined: Apr 2003
Posts: 1,669 Melbourne, Australia | My Ideal beach cat would firstly be one that I don't have to pay for. Then make me an all carbon Tornado. Forget the 8.5 beam... Give me heaps of beam and a beach to store it on with the mast up. May be an old aircraft hanger on the beach so the boat can stay out of the weather with its sails up and not get blown over. Come to think of it, give me a C Class and somewhere to store it. Is this too unrealistic | | | Re: What is the ideal beach cat design
[Re: grob]
#23171 08/13/03 09:05 AM 08/13/03 09:05 AM |
Joined: Jul 2001 Posts: 800 MI sail6000 OP
old hand
|
OP
old hand
Joined: Jul 2001
Posts: 800 MI | Hi Gareth and all Agree on the maintenence aspect ,-but boats are always needing care ,its part of racing and boating in general ,-finding a way to enjoy it ,--{and get lots of help } with others seems a key . Seems that most like to race similar boats in a class group . There is a waterbike on the lake locally here - http://www.seacycle.biz/ thought you might be interesred in it It uses the back 2 piece hull section ,-the back part acting as a rudder ,--a sail could easily be adapted to it , It makes a nice fishing platform also ideal for trolling - its a no motors allowed lake ,---thank goodness . Very different type of {ideal cat }design Back to the ideal cat design -which is many different things to different people at different stages on development with different intent and goals in sailing . An ultimate 20 RACING CAT with larger sailplan -spin forward w foils and planning capability able to handle the 1000 mile races is my ideal ,--but again very different from others ideal cat given different goals and experiences .- | | | My design
[Re: sail6000]
#23172 08/14/03 04:40 PM 08/14/03 04:40 PM |
Joined: Dec 2001 Posts: 5,590 Naples, FL waterbug_wpb
Carpal Tunnel
|
Carpal Tunnel
Joined: Dec 2001
Posts: 5,590 Naples, FL | I'm not so sure about the wings. I like sailing around the cans, and I can see a crowded starting line posing a problem if I had large wings and went bulldozing through!
I think the boat I have right now fits me well (I-20): Great around the cans, user friendly, doesn't kill the crew as badly as a 6.0 with huge spin does, sets up in a reasonable amount of time (but reasonable for me is WAY different than the H-16 guys), great in light/mod air and chop, points high, drives low, easy to set/snuff spin. If I were lighter, I'd probably switch to the I-18. Right now, I need muscle on the strings, so my crew usually tips the scale at 180 or so. That puts us at 360 or better, which is a bit heavy for the 18's.
Would I go uni? Perhaps. One advantage of my sloop rig is I can roll up the jib if things get breezy and I need to make it to shelter. Sure, on this boat, it only removes about 50 sq. ft, but sometimes, that just makes me feel better than having a big sail downhauled and flapping in the breeze. Battens get expensive, you know!
For distance, I think it works pretty well. I'm sure there would be many improvements for each discipline, but I guess this boat seems to be a good compromise...
Jay
| | | Re: My design
[Re: waterbug_wpb]
#23173 08/14/03 05:12 PM 08/14/03 05:12 PM |
Joined: Jul 2001 Posts: 800 MI sail6000 OP
old hand
|
OP
old hand
Joined: Jul 2001
Posts: 800 MI | Hi Jay Ya ,like the I-20 also ,-have raced it in 3 Worrells and a Tybee ,Its come through all but one beach called Jensen ,with 3 broken rudders trying to get out through the surf ,not to mention a squashed team-mate -{see dave under boat pic } think we are really missing the boat by not yet having a large Formula 2o CLASS Organization and the great larger group as the F-18s will soon have with N-F-18s -Tigers -Mysteres etc etc all to race in large groups ,and able to make improvements and modification as they choose within class specs. {like rudders} . We need a major concensis from numerous interested 20 owners that will commit to it ,-Barry on the East Coast has the first F-20 fleet racing going ,--congrates , Any can start one just by concensis of 20 sailors in your area . After the example of 18s this year it will become easier for many to understand and see the benifits of it . Also raced the H-21 with wings ,-way back in Prosail events in 88, They experimented and eliminated most rules so it was as you mentioned like {bulldozing through } or became more like the Chariot races of ancient Rome. The Miami race was pretty funny with about 20 H-21s wings locked up around the first A mark set on a reach from the start ,--it did not last long after that for numerous reasons. They -wings ,are really nice though once used to them . effectively adding beam and get you up off the water and able to see better , a little dryer too ,- A different type of larger wing is needed though to make them worth the added weight vs increase in sail area. The I-20 with its flat large hull sections gets close to planning at times ,-believe a little more sail area power and a more forward angled larger spin would get up and plane and provide a good jump in speed ,that combined with forward foils canted features and other design aspects noted for the {ideal cat design} -Most fun when your doing those distance races ,have the kite up and the wind just keeps building and building through the day - My ideal would be that next step in design to an ultimate planning type hull and more powerfull sailplan and more beam or wings to hold it down. Some of my best memories are flying off the back of wavetops and surfing down the backs of big Atlantic swells ,spin up strapped in trapped off the stern ,having a great time as helm or crew. That,s catsailing yeeeehaaa | | | Re: What is the ideal beach cat design
[Re: fishermen]
#23175 08/14/03 08:47 PM 08/14/03 08:47 PM |
Joined: Aug 2001 Posts: 251 beaufort, sc dannyb9
enthusiast
|
enthusiast
Joined: Aug 2001
Posts: 251 beaufort, sc | to me beach cats should be boardless. we have lots of beaches and bars here in coastal sc. ever tried sailing into a beach and have the board hang up as you are about to land? ever sailed a daggerboard boat across a sand bar at 20 kn? i'm curious about a rectangular section that might plane and be slab sided to go up without boards. anybody ever sail a planecat? i have been curious about that design,,, dan
marsh hawk
| | | Re: What is the ideal beach cat design
[Re: sail6000]
#23176 08/14/03 09:18 PM 08/14/03 09:18 PM |
Joined: Nov 2001 Posts: 351 Dallas, Texas thom
enthusiast
|
enthusiast
Joined: Nov 2001
Posts: 351 Dallas, Texas | Hello Carl-
You already know my answer but I will restate as follows: LOA 38ft, LWL 36', Beam 20 ft, high aspect daggerboards and kick up rudders, draft 3" boards up, 50'CF rotating spar, CF hulls, Aluminum beams, triple trap, 500 sqft for the main/jib [squaretop main], screecher 450sqft w/Fancor furler, code zero spin 1000 sqft on Fancor furler, 1250 sqft asymetric [flat] and forward triangle tramp. Total boat weight 1500lbs all up without crew. Tom Haberman/Bill Roberts designed/engineered/built of course. All sails by GMsails of Austrailia. If you want to see Gordon's work just look at Afterburner. What a difference those sails made for that boat.
If they build this boat I will buy one,
thommerrill FMS 20 #57 - still being refinished by Don Caldwell ARC22 #2234 - going back in the water this weekend F25c 009- the other Farrier Kit boat
ps if anybody see's caldwell tell him to call Thom... | | | Re: What is the ideal beach cat design
[Re: thom]
#23179 08/18/03 10:15 AM 08/18/03 10:15 AM |
Joined: Aug 2003 Posts: 284 S. Florida BRoberts
enthusiast
|
enthusiast
Joined: Aug 2003
Posts: 284 S. Florida | Hello Thom, Thanks for your confidence comment on Tom Haberman and myself. The ideal boat you describe is very close to an RC30. The RC30 has a 45ft tall carbon mast and 550 sqft of working sail area. I have tried several different cut screechers but I am having faster success with spinnakers from one particular sailmaker. Also screechers are twice as heavy as spinnakers. Roller furling gear is really heavy! As far as boat width goes, I have 5ft wide wings on each side of the 30 which brings the overall width up to 26ft with a 30ft LWL. The weight of the boat is 1000 pounds. I do not understand your comment about Afterburner and GMsails. The boat was a winner in New Zealand before it came to the US. It has been a winner ever since it has been in the US. So, what is this big difference that GMsails has made. All sails get old and have to be replaced eventually. The RC30 is a breakthrough design. It has a lower Portsmouth Number by US Sailing than an F40 and it costs 1/20th as much. The people that sail the boat can take it apart for trailering or put it together for sailing. It can be towed by a normal size automobile or a van. The F40 requires a crane for dismasting and loading the hulls onto a flat bed trailer. A tractor is required to tow the flat bed trailer. It takes two people to carry the mainsail of a F40 down the dock. The RC30 mainsail weighs 36 pounds with battens. Winches are required to trim the sails on an F40. Winches are slow to respond with to changing sail trim/requirements. Pulley systems and cam action jam cleats are quick to respond with. Two guys can pick up a 175pound RC30 hull and move it around, load and unload etc. A crane is used to pick up an F40 hull and move it around. A crane steps the mast on the F40. The RC30 uses a gin pole and the mainsheet pulley system. When boat size goes beyond 30ft, boat part weights quickly become greater than people can handle. For example, hull weight varies/scales with length cubed, l**3. A 175 pound hull at 30ft scales to 302 pounds at 36ft. Two guys can pick up a 175 pound hull easily. A couple of NFL linemen could pick up a 302 pound hull but not two 160 pound average sailors. The 30ft long beach cat is at the practical upper limit of manageable size boat components. Go beyonnd 30ft and things that increase in weight as the cube of their size just simply get out of hand for people to handle manually. For boats larger than 30ft in length and masts taller than 45ft, cranes and tractor trailer trucks are required and then the cost of boat ownership just exploated. That is why the whole F40 and Pro Sail thing failed, COSTS. If it had been done in RC30s, it would still be thriving today. The RC30 continues to turn in the lowest ET's and PN data that US Sailing has ever received. Good Sailing, Bill PS I want to hear about you winning some races out there in Texas. | | | Re: What is the ideal beach cat design
[Re: BRoberts]
#23180 08/18/03 01:33 PM 08/18/03 01:33 PM |
Joined: Jun 2001 Posts: 12,310 South Carolina Jake
Carpal Tunnel
|
Carpal Tunnel
Joined: Jun 2001
Posts: 12,310 South Carolina | We will let it weigh 400 pounds including everything. So the basic platform generates 400 pounds times 8.5ft/2 = 1700ftlbs of righting moment and that turns into 1700/300 = 5.67 ftlbs of righting moment per sqft of sail area. Bill, How is it calculated that a Tornado Sport utilizes 24.3ftlbs per square foot of sail area?
Jake Kohl | | | Re: What is the ideal beach cat design
[Re: BRoberts]
#23183 08/19/03 04:09 AM 08/19/03 04:09 AM |
Joined: Apr 2003 Posts: 1,669 Melbourne, Australia Tornado_ALIVE
Pooh-Bah
|
Pooh-Bah
Joined: Apr 2003
Posts: 1,669 Melbourne, Australia | I am also with Bill.... Once you sail a boat with some decent beam, you never look back.... and it takes a while to get the smile of your face . This normaly happens when you go for your first capsize and realize how far you have to fall These RC and ARC boats sound like serious fun. We don't have these Down Under... Please tell me more about them. Cost (new and second hand) Models and specs how many are raced and where (Internationaly) Manufacture or Class Websites Cheers | | | Re: What is the ideal beach cat design
[Re: BRoberts]
#23184 08/19/03 07:53 AM 08/19/03 07:53 AM |
Joined: Jun 2001 Posts: 12,310 South Carolina Jake
Carpal Tunnel
|
Carpal Tunnel
Joined: Jun 2001
Posts: 12,310 South Carolina | Here's some numbers (ignoring sail area):
Tornado, 10' wide, 395lbs, 160lb crew X 2 boat righting moment: (395/2)*10 = 1975 ftlbs crew righting moment: (160*2)*(10+2.9ft) = 4128 ftlbs TOTAL = 6,103 ftlbs
Nacra6.0NA boat righting moment: (460/2)*8.5 = 1955 ftlbs crew righting moment: (160*2)*(8.5+2.9) = 3648 ft lbs TOTAL: 5,603 ftlbs
This means the crew on the 6.0NA needs to make up a deficit righting moment of 500ftlbs and using the combined 320lb crew weight, a 1.56ft wing would do it. I certainly do not wish to doubt your expertise but I'm a little unclear where you derived that a 35' wide wing boat would be necessary.
Given a choice on the water, I would go with the 10' wide Tornado - hands down. However, given the choice of putting something behind my truck and traveling down the road, I would go with a 8.5' wide boat with wings. I think having wings on a one piece trailerable boat do give you a good deal more righting moment and might be worthwhile.
Jake Kohl | | |
|
0 registered members (),
352
guests, and 80
spiders. | Key: Admin,
Global Mod,
Mod | | Forums26 Topics22,405 Posts267,057 Members8,150 | Most Online2,167 Dec 19th, 2022 | | |