How did you get the deck off?. I recently heard some cracking noises while righting my P19 aft of the centerboard well. I think it was delaminating inside, however, no way to check it it out and if thats the case then I am looking at also removing the deck which Im not looking forward to do.

I recently set the boat w/ an F18 spinnaker and end pole snuffer, I have been loooking for a while for Tornado spinnakers/mainsails but no luck. F18 parts are more readily available. The main problem I had was the attachment of the support pin at the front crossbar. The pin (I think its a nacra standard) has a base with 4 attachment points, but due to the mast base casting it cannot be placed at the beam center. I secured it with two screws on the top two holes tapped into the the lower portion of the casting. For a pole Im using discarded Sunfish spars I can get free from a local sailing club (learned that trick while reseaching the P19 on this site), however I have gone through two already and I am currently searching for a windsurfing mast.

Good luck