First thing to remember is that Gremlins live inside the front beam... be very cautious

With that warning out of the way, the best way to get your bungee back is probably to take the endcaps off, then pull the bungee all the way through the beam to the opposite side from where you lost it. Then, attach it to a batten and feed it back through.

Inside your front beam you should have a double block on each end tied to vertical post inside the beam. There are three lines/bungees in there:

1. Jib sheet bungees (two)- dead end one end of bungee to vertical post, go through the beam to the bottom of the double block, then back through the beam and tie off to one end of jib sheet. Repeat for other side.

2. cunningham and bungee- We run a continuous downhaul that is lead out to the crew trapeze. each end of the cunningham line has a small eye splice that allows us to tie it together with opti sail tie, then untie to derig. I will try to make a picture of the layout... don't want to describe it.

3. Crew trap bungee- straight through beam




USF18 Eastern Area Rep
Nacra Infusion USA 753